NamelessRC Besthawk Whoop FPV drone

Top Source For All Things Drone Photography

NamelessRC Besthawk Whoop FPV drone

NamelessRC Besthawk

The newly announced NamelessRC Besthawk FPV drone will be available in two versions, with and without built-in DVR. Both versions features Caddx EOS2 camera and D400 5.8G VTX with up to 400 mW transmission power.

NamelessRC Besthawk is build on a 75mm size carbon fiber frame with large Tiny Whoop style ducted blade guards. All the electronic parts all well protected by a 3D printed canopy. The 11000KV motors are paired with 4-leaf propellers.

Sponosored AD

According to the manufacturer’s specs, the Besthawk Whoop drone can be powered by 2s as well as by 3s batteries.

NamelessRC Besthawk main features & technical specs

  • 75mm wheelbase;
  • Carbon fiber frame with nylon Whoop guards and 3D printed protective canopy;
  • NameLessRC AIO412 flight controller w/ built-in BEC;
  • 1103 type 11000KV brush-less motors with connectors;
  • 40mm 4-leaf propellers (1.5mm mounting hole);
  • NamelessRC D400 25-400mW VTX
  • Optional DVR AIO 720P DVR;
  • Caddx EOS2 1200TVL FPV camera;
  • Optional FrSky, FlySky, DSMX/2 or TBS Crossfire Nano radio receiver;
  • 2-3s LIPO compatible (300~450mAh suggested).

NamelessRC Besthawk main parts details

NamelessRC Besthawk main parts

NameLessRC AIO412 flight controller specs

  • Input Voltage: 2-4S Lipo / HV Lipo;
  • CPU: STM32F411CEU6 (100MHZ);
  • Sensor: MPU-6000 (connected by SPI)
    – Built-in Betaflight OSD
    – Built-in 5V 2.5A BEC Output with LC Filter
    – Built-in Current Sensor
  • Size: 28.5×28.5mm ;
  • Net Weight: 4.2 grams.
Built-in ESC specifications
  • Power supply: 2-4S LiPo/LiPo HV ( 7.4-17.4V);
  • Continue Current: 12A;
  • Burst current: 15A;
  • Firmware: BLHELI_S;
  • Motor Connectors: 1.25mm header pins connector;
  • Default protocol: DSHOT600.

NamelessRC D400 25-400mW VTX + DVR AIO 720P specs

  • Input voltage: 5V;
  • Output Power: PIT/25mW/100mW/200mW/400mW Switchable;
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ;
  • Control Mode: BFOSD Control/ Button, IRC Tramp ready;
  • Video Output format: NTSC;
  • Record video size: 1280×720 @30FPS;
  • TF Card support: Max. 32G;
  • Compress Format: AVI;
  • Microphone: Yes;
  • Antenna: IPEX;
  • Mounting hole: 26.5 * 26.5mm;
  • Weight: 3.5g without antenna.

Motor specs

  • KV : 11000;
  • Voltage: 3.7-11.1V;
  • Motor Width: 13.6mm;
  • Shaft Diameter: 1.5mm;
  • Motor Mount Holes: M1.6 on Dia 8.5mm;
  • Plug: Micro JST-1.25 3-pins con;
  • Battery: 1-3S lipo battery;
  • Weight: about 3.2 grams.

Source link

Leave a Reply

Your email address will not be published. Required fields are marked *